1UPKeyboards Discord

Join 1UPKeyboards Discord

https://discord.gg/AGuKen3

1UP RGB 60% PCB HSE (hot swap edition) ANSI

$55.00 $45.00

Out of stock

(2 customer reviews)

Description

NOTE: Restock for this item has been delayed due to mandatory holiday extensions in China because of the Coronavirus outbreak. Our original estimate was to have the PCBs back in before the end of February but that timeline is currently up in the air. Thanks for your patience and understanding.

1UP RGB Underglow 60% fully programmable PCB that’s Hot Swappable – so no soldering required.

Now works with USB C to USB C cables!

Now everyone can create a custom, fully programmable keyboard without any tools or experience!

  • Hot swappable for MX switches.
  • Standard ANSI layout only.
  • Fully programmable 60% PCB.
  • RGB underglow.
  • Key remapping with QMK [click here] and kbfirmware.com [through the JSON]
  • Supports in-switch North-facing LEDs.
  • Diodes, resistors and hotswap sockets presoldered.
  • Multimedia keys supported.
  • Black PCB with rear facing 1UP logo.

Combine this with a clear, semi transparent base or open-sided case, like a Z-Case, an acrylic frosted base or a sandwich kit, like the LJD61UP, to create your endgame RGB board without soldering.

*** IMPORTANT INFORMATION ***

  • Switches must be installed with the PCB on a flat surface, so as to not damage the hot swap sockets. Pushing the switches in while holding the PCB in midair may cause the hot swap sockets to come off.
  • Due to the hot swap sockets and the USB C connector some cases may not be compatible without modification.
  • There is no middle hole screw placement between letters G and H for universal bases as it interferes with the hot swap socket.

Fully programmable using QMK.

QMK Firmware Badge

Try the visual programmer with QMK: https://config.qmk.fm/#/1upkeyboards/1up60hse/LAYOUT_60_ansi

Download the JSON here and start your layout on kbfirmware.com.

Or just download the default hex and get started.

***FREE shipping within the CONUS***

International shipping is calculated in the cart prior to purchase.

Description

NOTE: Restock for this item has been delayed due to mandatory holiday extensions in China because of the Coronavirus outbreak. Our original estimate was to have the PCBs back in before the end of February but that timeline is currently up in the air. Thanks for your patience and understanding.

1UP RGB Underglow 60% fully programmable PCB that’s Hot Swappable – so no soldering required.

Now works with USB C to USB C cables!

Now everyone can create a custom, fully programmable keyboard without any tools or experience!

  • Hot swappable for MX switches.
  • Standard ANSI layout only.
  • Fully programmable 60% PCB.
  • RGB underglow.
  • Key remapping with QMK [click here] and kbfirmware.com [through the JSON]
  • Supports in-switch North-facing LEDs.
  • Diodes, resistors and hotswap sockets presoldered.
  • Multimedia keys supported.
  • Black PCB with rear facing 1UP logo.

Combine this with a clear, semi transparent base or open-sided case, like a Z-Case, an acrylic frosted base or a sandwich kit, like the LJD61UP, to create your endgame RGB board without soldering.

*** IMPORTANT INFORMATION ***

  • Switches must be installed with the PCB on a flat surface, so as to not damage the hot swap sockets. Pushing the switches in while holding the PCB in midair may cause the hot swap sockets to come off.
  • Due to the hot swap sockets and the USB C connector some cases may not be compatible without modification.
  • There is no middle hole screw placement between letters G and H for universal bases as it interferes with the hot swap socket.

Fully programmable using QMK.

QMK Firmware Badge

Try the visual programmer with QMK: https://config.qmk.fm/#/1upkeyboards/1up60hse/LAYOUT_60_ansi

Download the JSON here and start your layout on kbfirmware.com.

Or just download the default hex and get started.

***FREE shipping within the CONUS***

International shipping is calculated in the cart prior to purchase.

Additional information

Weight 0.5 lbs
Dimensions 13 × 5 × 1 in

2 reviews for 1UP RGB 60% PCB HSE (hot swap edition) ANSI

  1. yuckar97 (verified owner)

    Quick and easy to setup, build and use.

  2. Nathaniel Alexander (verified owner)

    A fantastic PCB for the price!

Only logged in customers who have purchased this product may leave a review.

Pin It on Pinterest